@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================

#1=HMI\Labels\CounterScale20
#2=HMI\Labels\CounterScale21
#3=HMI\Labels\CounterScale22
#4=HMI\Labels\CounterScale23
#5=HMI\Labels\CounterScale24
#6=HMI\Labels\CounterScale25
#7=HMI\Labels\CounterScale26
#8=HMI\Labels\CounterScale27
#9=HMI\Labels\CounterScale28
#10=HMI\Labels\CounterScale29
#11=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlOpUpst
#12=[Logix]HMI_RecipeOffline.CounterAndScale.MECHDGlOpDnst
#13=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlueCarOp
#14=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlFlapOp
#15=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlTopFoldOp
#16=[Logix]HMI_RecipeOffline.CounterAndScale.MECHPackShoeOp
#17=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlTopFoldNonOp
#18=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlFlapNonOp
#19=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlueCarNonOp
#20=[Logix]HMI_RecipeOffline.CounterAndScale.MECHDGlNonOpDnst